Ss 202 Foam Making Tank For Car Wash

Product Description

• Product Details

Foam barrel Accessories : inlet valve, pressure regulator , pressure gauge, plus valve , foam produced valves, quiet valves, hoses, drain valve , foam valve , funnel, 6 m hose ( can be extended ) .

Stainless Foam Machine divided into two kinds of materials : 202 material

Now we are all made of copper valves, plastic valves in addition to the outer drum .

Capacity : 80L

Use pump :1- 1.5 kilograms ( 1.5 )

Working pressure: less than or equal 0.01MPA

Tank Material: Stainless steel 201 / 304 and iron

Valve material : brass ball valve

Plate thickness: stainless steel 1.2MM, 1.5MM iron

Pipe size : 12 * 6 meters

Packing size : 45 * 39 * 80CM

Packing : 1PCS

Weight: 15 kg

Instructions: Open the inlet valve, adding deployment of good water liquid wax . Close the valve inlet valve and gun , and then use quick connectors connect compressed air. More work ready, connected to compressed air , etc. Working pressure up to 2Bar , open the gun valve to spray water wax , spray distance and spray methods can be used to regulate the pressure and gun .

Note: This product regulator is factory adjusted pressure 2Bar, if not necessary , do not arbitrarily transferred to air pressure. 2Bar use pressure , ejection best results.

Basic troubleshooting If you open the valve when the gun hit anhydrous wax reasons may be: no gas into the gas source ; aqueous liquid wax bottomed out ;

This equipment regularly checked for leakage , if any should immediately overhaul.

Always check the hose connections are tight , the device should always use a towel to wipe the surface clean, keep the equipment clean , used equipment as possible after discharge clear liquid bucket and placed in the shade to avoid the barrel rust corrosion affect the normal use .

Note: Before using the equipment , please read this instructions, training of qualified rear operational use . No smoking near the equipment .

   Please adjust the gun when using the distance , to avoid accidents wounding .

   Do not use poor quality water, liquid wax to maintain the equipment within the oil valve , rubber and other parts of life and the cleaning effect.

Bubble machine design, delicate bubbles , uniform, low efficiency , easy to move . By car wash beauty industry 's favor .

Instructions for use:

1 Open plus valve and exhaust valve, adding 70 liters of water , then add the washing liquid 1000 ml ( Note : If you are the first time, plus the best washing liquid 1200 ml )

(2) Close the valve and the exhaust valve plus , shut the gun valve switch, and then connect the compressed air with quick connector

3 The above work is ready, open air switch, until the pressure rises to 0.09Mpa , open the gun valve switch, you can spray foam

4 Fill 70 liters per 1000 ml of water and washing liquid , you can wash cars 30-30 cars , 25 liters per tank washing liquid can be washed 750 cars

Note: This product is a pressure vessel , pressure valve is factory adjusted pressure 0.09Mpa, please do not adjust air pressure valve , overpressure is strictly prohibited to use the product !

Name: Tank Foam machine

 Logistics Volume: 0.14 m2
Weight: about 15 kg
Package Size: 45 * 39 * 80
Thickness: Iron 1.5MM, 1.2MM stainless steel
Pipe size: 12 * 6MM
Tank capacity: 80L
Working pressure: 0.01MPA